Skip to main content
Version: 8.4

Introduction to Baremetal

Once you've grown beyond the confines and limitations of the cloud deployment providers, it's time to get serious: hosting your own code on big iron. Prepare for performance like you've only dreamed of! Also be prepared for IT and infrastructure responsibilities like you've only had nightmares of.

With Redwood's Baremetal deployment option, the source (like your dev machine) will SSH into one or more remote machines and execute commands in order to update your codebase, run any database migrations and restart services.

Deploying from a client (like your own development machine) consists of running a single command:

First time deploy:

yarn rw deploy baremetal production --first-run

Subsequent deploys:

yarn rw deploy baremetal production
Deploying to baremetal is an advanced topic

If you haven't done any kind of remote server work before, you may be in a little over your head to start with. But don't worry: until relatively recently (cloud computing, serverless, lambda functions) this is how all websites were deployed, so we've got a good 30 years of experience getting this working!

If you're new to connecting to remote servers, check out the Intro to Servers guide we wrote just for you.

Deployment Lifecycle

The Baremetal deploy runs several commands in sequence. These can be customized, to an extent, and some of them skipped completely:

  1. df to make sure there is enough free disk space on the server
  2. git clone --depth=1 to retrieve the latest code
  3. Symlink the latest deploy .env to the shared .env in the app dir
  4. yarn install - installs dependencies
  5. Runs prisma DB migrations
  6. Generate Prisma client libs
  7. Runs data migrations
  8. Builds the web and/or api sides
  9. Symlink the latest deploy dir to current in the app dir
  10. Restart the serving process(es)
  11. Remove older deploy directories

First Run Lifecycle

If the --first-run flag is specified then step 7 above will execute the following commands instead:

  • pm2 start [service] - starts the serving process(es)
  • pm2 save - saves the running services to the deploy users config file for future startup. See Starting on Reboot for further information

Directory Structure

Once you're deployed and running, you'll find a directory structure that looks like this:

└── var
└── www
└── myapp
├── .env <────────────────┐
├── current ───symlink──┐ │
└── releases │ │
└── 20220420120000 <┘ │
├── .env ─symlink─┘
├── api
├── web
├── ...

There's a symlink current pointing to directory named for a timestamp (the timestamp of the last deploy) and within that is your codebase, the latest revision having been cloned. The .env file in that directory is then symlinked back out to the one in the root of your app path, so that it can be shared across deployments.

So a reference to /var/www/myapp/current will always be the latest deployed version of your codebase. If you wanted to setup nginx to serve your web side, you would point it to /var/www/myapp/current/web/dist as the root and it will always be serving the latest code: a new deploy will change the current symlink and nginx will start serving the new files instantaneously.

App Setup

Run the following to add the required config files to your codebase:

yarn rw setup deploy baremetal

This will add dependencies to your package.json and create two files:

  1. deploy.toml contains server config for knowing which machines to connect to and which commands to run
  2. ecosystem.config.js for PM2 to know what service(s) to monitor

If you see an error from gyp you may need to add some additional dependencies before yarn install will be able to complete. See the README for node-type for more info: https://github.com/nodejs/node-gyp#installation

Configuration

Before your first deploy you'll need to add some configuration.

ecosystem.config.js

By default, baremetal assumes you want to run the yarn rw serve command, which provides both the web and api sides. The web side will be available on port 8910 unless you update your redwood.toml file to make it available on another port. The default generated ecosystem.config.js will contain this config only, within a service called "serve":

ecosystem.config.js
module.exports = {
apps: [
{
name: 'serve',
cwd: 'current',
script: 'node_modules/.bin/rw',
args: 'serve',
instances: 'max',
exec_mode: 'cluster',
wait_ready: true,
listen_timeout: 10000,
},
],
}

If you follow our recommended config below, you could update this to only serve the api side, because the web side will be handled by nginx. That could look like:

ecosystem.config.js
module.exports = {
apps: [
{
name: 'api',
cwd: 'current',
script: 'node_modules/.bin/rw',
args: 'serve api',
instances: 'max',
exec_mode: 'cluster',
wait_ready: true,
listen_timeout: 10000,
},
],
}

deploy.toml

This file contains your server configuration: which servers to connect to and which commands to run on them.

deploy.toml
[[production.servers]]
host = "server.com"
username = "user"
agentForward = true
sides = ["api","web"]
packageManagerCommand = "yarn"
monitorCommand = "pm2"
path = "/var/www/app"
processNames = ["serve"]
repo = "git@github.com:myorg/myapp.git"
branch = "main"
keepReleases = 5

This lists a single server, in the production environment, providing the hostname and connection details (username and agentForward), which sides are hosted on this server (by default it's both web and api sides), the path to the app code and then which PM2 service names should be (re)started on this server.

Config Options

  • host - hostname to the server
  • port - [optional] ssh port for server connection, defaults to 22
  • username - the user to login as
  • password - [optional] if you are using password authentication, include that here
  • privateKey - [optional] if you connect with a private key, include the content of the key here, as a buffer: privateKey: Buffer.from('...'). Use this or privateKeyPath, not both.
  • privateKeyPath - [optional] if you connect with a private key, include the path to the key here: privateKeyPath: path.join('path','to','key.pem') Use this or privateKey, not both.
  • passphrase - [optional] if your private key contains a passphrase, enter it here
  • agentForward - [optional] if you have agent forwarding enabled, set this to true and your own credentials will be used for further SSH connections from the server (like when connecting to GitHub)
  • sides - An array of sides that will be built on this server
  • packageManagerCommand - The package manager bin to call, defaults to yarn but could be updated to be prefixed with another command first, for example: doppler run -- yarn
  • monitorCommand - The monitor bin to call, defaults to pm2 but could be updated to be prefixed with another command first, for example: doppler run -- pm2
  • path - The absolute path to the root of the application on the server
  • migrate - [optional] Whether or not to run migration processes on this server, defaults to true
  • processNames - An array of service names from ecosystem.config.js which will be (re)started on a successful deploy
  • repo - The path to the git repo to clone
  • branch - [optional] The branch to deploy (defaults to main)
  • keepReleases - [optional] The number of previous releases to keep on the server, including the one currently being served (defaults to 5)
  • freeSpaceRequired - [optional] The amount of free space required on the server in MB (defaults to 2048 MB). You can set this to 0 to skip checking.

The easiest connection method is generally to include your own public key in the server's ~/.ssh/authorized_keys mannually or by running ssh-copy-id user@server.com from your local machine, enable agent forwarding, and then set agentForward = true in deploy.toml. This will allow you to use your own credentials when pulling code from GitHub (required for private repos). Otherwise you can create a deploy key and keep it on the server.

Using Environment Variables in deploy.toml

Similarly to redwood.toml, deploy.toml supports interpolation of environment variables. For more details on how to use the environment variable interpolation see Using Environment Variables in redwood.toml

Multiple Servers

If you start horizontally scaling your application you may find it necessary to have the web and api sides served from different servers. The configuration files can accommodate this:

deploy.toml
[[production.servers]]
host = "api.server.com"
username = "user"
agentForward = true
sides = ["api"]
path = "/var/www/app"
processNames = ["api"]

[[production.servers]]
host = "web.server.com"
username = "user"
agentForward = true
sides = ["web"]
path = "/var/www/app"
migrate = false
processNames = ["web"]
ecosystem.config.js
module.exports = {
apps: [
{
name: 'api',
cwd: 'current',
script: 'node_modules/.bin/rw',
args: 'serve api',
instances: 'max',
exec_mode: 'cluster',
wait_ready: true,
listen_timeout: 10000,
},
{
name: 'web',
cwd: 'current',
script: 'node_modules/.bin/rw',
args: 'serve web',
instances: 'max',
exec_mode: 'cluster',
wait_ready: true,
listen_timeout: 10000,
},
],
}

Note the inclusion of migrate = false so that migrations are not run again on the web server (they only need to run once and it makes sense to keep them with the api side).

You can add as many [[servers]] blocks as you need.

Multiple Environments

You can deploy to multiple environments from a single deploy.toml by including servers grouped by environment name:

deploy.toml
[[production.servers]]
host = "prod.server.com"
username = "user"
agentForward = true
sides = ["api", "web"]
path = "/var/www/app"
processNames = ["serve"]

[[staging.servers]]
host = "staging.server.com"
username = "user"
agentForward = true
sides = ["api", "web"]
path = "/var/www/app"
processNames = ["serve", "stage-logging"]

At deploy time, include the environment in the command:

yarn rw deploy baremetal staging

Note that the codebase shares a single ecosystem.config.js file. If you need a different set of services running in different environments you'll need to simply give them a unique name and reference them in the processNames option of deploy.toml (see the additional stage-logging process in the above example).

Server Setup

You will need to create the directory in which your app code will live. This path will be the path var in deploy.toml. Make sure the username you will connect as in deploy.toml has permission to read/write/execute files in this directory. For example, if your /var dir is owned by root, but you're going to deploy with a user named deploy:

sudo mkdir -p /var/www/myapp
sudo chown deploy:deploy /var/www/myapp

You'll want to create an .env file in this directory containing any environment variables that are needed by your app (like DATABASE_URL at a minimum). This will be symlinked to each release directory so that it's available as the app expects (in the root directory of the codebase).

SSH and Non-interactive Sessions

The deployment process uses a 'non-interactive' SSH session to run commands on the remote server. A non-interactive session will often load a minimal amount of settings for better compatibility and speed. In some versions of Linux .bashrc by default does not load (by design) from a non-interactive session. This can lead to yarn (or other commands) not being found by the deployment script, even though they are in your path, because additional ENV vars are set in ~/.bashrc which provide things like NPM paths and setup.

A quick fix on some distros is to edit the deployment user's ~/.bashrc file and comment out the lines that stop non-interactive processing.

~/.bashrc
# If not running interactively, don't do anything
- case $- in
- *i*) ;;
- *) return;;
- esac

# If not running interactively, don't do anything
+ # case $- in
+ # *i*) ;;
+ # *) return;;
+ # esac

This may also be a one-liner like:

~/.bashrc
- [ -z "$PS1" ] && return
+ # [ -z "$PS1" ] && return

There are techniques for getting node, npm and yarn to be available without loading everything in .bashrc. See this comment for some ideas.

First Deploy

Back on your development machine, enter your details in deploy.toml, commit it and push it up, and then try a first deploy:

yarn rw deploy baremetal production --first-run

If there are any issues the deploy should stop and you'll see the error message printed to the console.

If it worked, hooray! You're deployed to BAREMETAL. If not, read on...

Troubleshooting

On the server you should see a new directory inside the path you defined in deploy.toml. It should be a timestamp of the deploy, like:

drwxrwxr-x 7 ubuntu ubuntu 4096 Apr 22 23:00 ./
drwxr-xr-x 7 ubuntu ubuntu 4096 Apr 22 22:46 ../
-rw-rw-r-- 1 ubuntu ubuntu 1167 Apr 22 20:49 .env
drwxrwxr-x 10 ubuntu ubuntu 4096 Apr 22 21:43 20220422214218/

You may or may not also have a current symlink in the app directory pointing to that timestamp directory (it depends how far the deploy script got before it failed as to whether you'll have the symlink or not).

cd into that timestamped directory and check that you have a .env symlink pointing back to the app directory's .env file.

Next, try performing all of the steps yourself that would happen during a deploy:

yarn install
yarn rw prisma migrate deploy
yarn rw prisma generate
yarn rw dataMigrate up
yarn rw build
ln -nsf "$(pwd)" ../current

If they worked for you, the deploy process should have no problem as it runs the same commands (after all, it connects via SSH and runs the same commands you just did!)

Next we can check that the site is being served correctly. Run yarn rw serve and make sure your processes start and are accessible (by default on port 8910):

curl http://localhost:8910
# or
wget http://localhost:8910

If you don't see the content of your web/src/index.html file then something isn't working. You'll need to fix those issues before you can deploy. Verify the api side is responding:

curl http://localhost:8910/.redwood/functions/graphql?query={redwood{version}}
# or
wget http://localhost:8910/.redwood/functions/graphql?query={redwood{version}}

You should see something like:

{
"data": {
"redwood": {
"version": "1.0.0"
}
}
}

If so then your API side is up and running! The only thing left to test is that the api side has access to the database. This call would be pretty specific to your app, but assuming you have port 8910 open to the world you could simply open a browser to click around to find a page that makes a database request.

Was the problem with starting your PM2 process? That will be harder to debug here in this doc, but visit us in the forums or Discord and we'll try to help!

My pm2 processes are running but your app has errors, how do I see them?

If your processes are up and running in pm2 you can monitor their log output. Run pm2 monit and get a nice graphical interface for watching the logs on your processes. Press the up/down arrows to move through the processes and left/right to switch panes.

pm2 monit screenshot

Sometimes the log messages are too long to read in the pane at the right. In that case you can watch them live by "tailing" them right in the terminal. pm2 logs are written to ~/.pm2/logs and are named after the process name and id, and whether they are standard output or error messages. Here's an example directory listing:

ubuntu@ip-123-45-67-89:~/.pm2/logs$ ll
total 116
drwxrwxr-x 2 ubuntu ubuntu 4096 Jan 20 17:58 ./
drwxrwxr-x 5 ubuntu ubuntu 4096 Jan 20 17:40 ../
-rw-rw-r-- 1 ubuntu ubuntu 0 Jan 20 17:58 api-error-0.log
-rw-rw-r-- 1 ubuntu ubuntu 0 Jan 20 17:58 api-error-1.log
-rw-rw-r-- 1 ubuntu ubuntu 27788 Jan 20 18:11 api-out-0.log
-rw-rw-r-- 1 ubuntu ubuntu 21884 Jan 20 18:11 api-out-1.log

To watch a log live, run:

tail -f ~/.pm2/logs/api-out-0.log

Note that if you have more than one process running, like we do here, requesting a page on the website will send the request to one of available processes randomly, so you may not see your request show up unless you refresh a few times. Or you can connect to two separate SSH sessions and tail both of the log files at the same time.

Starting Processes on Server Restart

The pm2 service requires some system "hooks" to be installed so it can boot up using your system's service manager. Otherwise, your PM2 services will need to be manually started again on a server restart. These steps only need to be run the first time you install PM2.

SSH into your server and then run:

pm2 startup

You will see some output similar to the output below. We care about the output after "copy/paste the following command:" You'll need to do just that: copy the command starting with sudo and then paste and execute it. Note this command uses sudo so you'll need the root password to the machine in order for it to complete successfully.

warning

The below text is example output, yours will be different, don't copy and paste ours!

$ pm2 startup
[PM2] Init System found: systemd
[PM2] To setup the Startup Script, copy/paste the following command:
// highlight-next-line
sudo env PATH=$PATH:/home/ubuntu/.nvm/versions/node/v16.13.2/bin /home/ubuntu/.nvm/versions/node/v16.13.2/lib/node_modules/pm2/bin/pm2 startup systemd -u ubuntu --hp /home/ubuntu

In this example, you would copy sudo env PATH=$PATH:/home/ubuntu/.nvm/versions/node/v16.13.2/bin /home/ubuntu/.nvm/versions/node/v16.13.2/lib/node_modules/pm2/bin/pm2 startup systemd -u ubuntu --hp /home/ubuntu and run it. You should get a bunch of output along with [PM2] [v] Command successfully executed. near the end. Now if your server restarts for whatever reason, your PM2 processes will be restarted once the server is back up.

Customizing the Deploy

There are several ways you can customize the deploys steps, whether that's skipping steps completely, or inserting your own commands before or after the default ones.

Skipping Steps

If you want to speed things up you can skip one or more steps during the deploy. For example, if you have no database migrations, you can skip them completely and save some time:

yarn rw deploy baremetal production --no-migrate

Run yarn rw deploy baremetal --help for the full list of flags. You can set them as --migrate=false or use the --no-migrate variant.

Inserting Custom Commands

Baremetal supports running your own custom commands before or after the regular deploy commands. You can run commands before and/or after the built-in commands. Your custom commands are defined in the deploy.toml config file. The existing commands that you can hook into are:

  1. df - Checking for free disk space
  2. update - cloning the codebase
  3. symlinkEnv - symlink the new deploy's .env to shared one in the app dir
  4. install - yarn install
  5. migrate - database migrations
  6. build - yarn build (your custom before/after command is run for each side being built)
  7. symlinkCurrent - symlink the new deploy dir to current in the app dir
  8. restart - (re)starting any pm2 processes (your custom command will run before/after each process is restarted)
  9. cleanup - cleaning up any old releases

You can define your before/after commands in three different places:

  • Globally - runs for any environment
  • Environment specific - runs for only a single environment
  • Server specific - runs for only a single server in a single environment
warning

Custom commands are run in the new deploy directory, not the root of your application directory. During a deploy the current symlink will point to the previous directory while your code is executed in the new one, before the current symlink location is updated.

drwxrwxr-x 5 ubuntu ubuntu 4096 May 10 18:20 ./
drwxr-xr-x 7 ubuntu ubuntu 4096 Apr 27 17:43 ../
drwxrwxr-x 2 ubuntu ubuntu 4096 May 9 22:59 20220503211428/
drwxrwxr-x 2 ubuntu ubuntu 4096 May 9 22:59 20220503211429/
drwxrwxr-x 10 ubuntu ubuntu 4096 May 10 18:18 20220510181730/ commands are run in here < --
lrwxrwxrwx 1 ubuntu ubuntu 14 May 10 18:19 current - > 20220503211429/
-rw-rw-r-- 1 ubuntu ubuntu 1167 Apr 22 20:49 .env

Syntax

Global events are defined in a [before] and/or [after] block in your deploy.toml file:

[before]
install = "touch install.lock"

[after]
install = "rm install.lock"

[[production.servers]]
host = 'server.com'
# ...

Environment specific commands are defined in a [[environment.before]] and [[environment.after]] block:

[production.before]
install = "touch prod-install.lock"

[production.after]
install = "rm prod-install.lock"

[production.servers]
host = 'server.com'
# ...

Server specific commands are defined with a before.command and after.command key directly in your server config:

[[production.servers]]
host = 'server.com'
# ...
before.install = 'touch server-install.lock'
after.install = 'rm server-install.lock'

You can define commands as a string, or an array of strings if you want to run multiple commands:

[before]
install = ["echo 'started at $(date)' > install.lock", "cp -R . ../backup"]

[[production.servers]]
host = 'server.com'
# ...

You can include commands in any/all of the three configurations (global, env and server) and they will all be stacked up and run in that order: global -> environment -> server. For example:

[[production.servers]]
host = 'server.com'
# ...
before.install = 'touch server-install.lock'

[production.before]
install = ['touch prod-install1.lock', 'touch prod-install2.lock']

[before]
install = 'touch install.lock'

Would result in the commands running in this order, all before running yarn install:

  1. touch install.lock
  2. touch prod-install1.lock
  3. touch prod-install2.lock
  4. touch server-install.lock

Rollback

If you deploy and find something has gone horribly wrong, you can rollback your deploy to the previous release:

yarn rw deploy baremetal production --rollback

You can even rollback multiple deploys, up to the total number you still have denoted with the keepReleases option:

yarn rw deploy baremetal production --rollback 3

Note that this will not rollback your database—if you had a release that changed the database, that updated database will still be in effect, but with the previous version of the web and api sides. Trying to undo database migrations is a very difficult proposition and isn't even possible in many cases.

Make sure to thoroughly test releases that change the database before doing it for real!

Maintenance Page

If you find that you have a particular complex deploy, one that may involve incompatible database changes with the current codebase, or want to make sure that database changes don't occur while in the middle of a deploy, you can put up a maintenance page:

yarn rw deploy baremetal production --maintenance up

It does this by replacing web/dist/200.html with web/src/maintenance.html. This means any new web requests, at any URL, will show the maintenance page. This process also stops any services listed in the processNames option of deploy.toml—this is important for the api server as it will otherwise keep serving requests to users currently running the app, even though no new users can get the Javascript packages required to start a new session in their browser.

You can remove the maintenance page with:

yarn rw deploy baremetal production --maintenance down

Note that the maintenance page will automatically come down as the result of a new deploy as it checks out a new copy of the codebase (with a brand new copy of web/dist/200.html and will automatically restart services (bring them all back online).

Monitoring

PM2 has a nice terminal-based dashboard for monitoring your services:

pm2 monit

pm2 dashboard

And even a web-based UI with paid upgrades if you need to give normies access to your monitoring data:

pm2 web dashboard

Example Server Configurations

The default configuration, which requires the least amount of manual configuration, is to serve both the web and api sides, with the web side being bound to port 8910. This isn't really feasible for a general web app which should be available on port 80 (for HTTP) and/or port 443 (for HTTPS). Here are some custom configs to help.

Redwood Serves Web and Api Sides, Bind to Port 80

This is almost as easy as the default configuration, you just need to tell Redwood to bind to port 80. However, most *nix distributions will not allow a process to bind to ports lower than 1024 without root/sudo permissions. There is a command you can run to allow access to a specific binary (node in this case) to bind to one of those ports anyway.

Tell Redwood to Bind to Port 80

Update the [web] port:

redwood.toml
[web]
title = "My Application"
apiUrl = "/.netlify/functions"
+ port = 80
[api]
port = 8911
[browser]
open = true

Allow Node to Bind to Port 80

Use the setcap utility to provide access to lower ports by a given process:

sudo setcap CAP_NET_BIND_SERVICE=+eip $(which node)

Now restart your service and it should be available on port 80:

pm2 restart serve

This should get your site available on port 80 (for HTTP), but you really want it available on port 443 (for HTTPS). That won't be easy if you continue to use Redwood's internal web server. See the next recipe for a solution.

Redwood Serves Api, Nginx Serves Web Side

nginx is a very robust, dedicated web server that can do a better job of serving our static web-side files than Redwood's own built-in web server (Fastify) which isn't really configured in Redwood for a high traffic, production website.

If nginx will be serving our web side, what about api-side? Redwood's internal API server will be running, but on the default port of 8911. But browsers are going to want to connect on port 80 (HTTP) or 443 (HTTPS). nginx takes care of this as well: it will proxy (forward) any requests to a path of your choosing (like the default of /.redwood/functions) to port 8911 behind the scenes, then return the response to the browser.

This doc isn't going to go through installing and getting nginx running, there are plenty of resources for that available. What we will show is a successful nginx configuration file used by several Redwood apps currently in production.

nginx.conf
upstream redwood_server {
server 127.0.0.1:8911 fail_timeout=0;
}

server {
root /var/www/myapp/current/web/dist;
server_name myapp.com;
index index.html;

gzip on;
gzip_min_length 1000;
gzip_types application/json text/css application/javascript application/x-javascript;

sendfile on;

keepalive_timeout 65;

error_page 404 /404.html;
error_page 500 /500.html;

location / {
try_files $uri /200.html =404;
}

location ^~ /static/ {
gzip_static on;
expires max;
add_header Cache-Control public;
}

location ~ /.redwood/functions(.*) {
rewrite ^/.redwood/functions(.*) $1 break;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_pass http://redwood_server;
}
}

Now when you start Redwood, you're only going to start the api server:

yarn rw serve api

When using pm2 to start/monitor your processes, you can simplify your deploy.toml and ecosystem.config.js files to only worry about the api side:

deploy.toml
[[production.servers]]
host = "myserver.com"
username = "ubuntu"
agentForward = true
sides = ["api", "web"]
path = "/var/www/myapp"
processNames = ["api"]
repo = "git@github.com:redwoodjs/myapp.git"
branch = "main"
keepReleases = 3
packageManagerCommand = "yarn"
monitorCommand = "pm2"
ecosystem.config.js
module.exports = {
apps: [
{
name: 'api',
cwd: 'current',
script: 'node_modules/.bin/rw',
args: 'serve api',
instances: 'max',
exec_mode: 'cluster',
wait_ready: true,
listen_timeout: 10000,
},
],
}

This is the bare minimum to get your site served over HTTP, insecurely. After verifying that your site is up and running, we recommend using Let's Encrypt to provision a SSL cert and it will also automatically update your nginx config so everything is served over HTTPS.

Custom API Path

If you don't love the path of /.redwood/functions for your API calls, this is easy to change. You'll need to tell Redwood to use a different path in development, and then let nginx know about that same path so that it resolves the same in production.

For example, to simplify the path to just /api you'll need to make a change to redwood.toml and your new nginx config file:

redwood.toml
[web]
title = "My App"
port = 8910
host = '0.0.0.0'
apiUrl = "/api"
[api]
port = 8911
[browser]
open = true
nginx.conf
upstream redwood_server {
server 127.0.0.1:8911 fail_timeout=0;
}

server {
root /var/www/myapp/current/web/dist;
server_name myapp.com;
index index.html;

gzip on;
gzip_min_length 1000;
gzip_types application/json text/css application/javascript application/x-javascript;

sendfile on;

keepalive_timeout 65;

error_page 404 /404.html;
error_page 500 /500.html;

location / {
try_files $uri /200.html =404;
}

location ^~ /static/ {
gzip_static on;
expires max;
add_header Cache-Control public;
}

location ~ /api(.*) {
rewrite ^/api(.*) $1 break;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_pass http://redwood_server;
}
}